V-EDGE® Leading-Edge SRLs
Specifically engineered and tested for use at foot-level tie off, the V-EDGE SRL meets EN 360: 2002 & VG11 sheet 60 Leading-Edge requirements.
The V-EDGE SRLs are intended to be used where user mobility is required and fall protection is needed (inspection work, general construction & maintenance work etc.) and where there is a residual risk of falling over an edge.The V-EDGE SRL may also be used for fall restraint and horizontal applications.
- The tear webbing energy absorber ensures the forces passed to the User and anchorage are reduced to below 6 kN
- All internal components are manufactured from materials with inherently high corrosion resistant properties
- Retraction dampening device restricting ultimate lifeline retraction velocity if released whilst extracted
- The toughened case is designed to resist impact damage and protect internal components
- The external roll cage provides easy floor level use whilst protecting product integrity
- All V-EDGE SRLs are individually serial number marked to ensure full traceability
- Rigid UV stable plastic case protects the tear webbing from damage
- Designed to be site serviceable and easily repaired by MSA trained Technicians; maximising availability
- Clear case to allow visual inspection of internal components
- For a single User only within the weight range 60 - 140 kg (130 - 310 lbs) (including tools
- The V-EDGE SRL shall be examined, in accordance with MSA instructions’, at least every 12 months. A periodic examination can be carried out on-site by a Competent person following MSA instructions’ or an MSA trained Technician.
- Use in a variety of applications, from overhead to horizontal tie off points, and where exposed edges are a concern.
Get to Work Faster:- Clear outer casing allows for quick visual inspection of internal components
Lower Cost of Ownership:- Integrated roll cage protects housing when used in foot-level tie off. Retraction dampening feature controls the life line speed—preventing unwanted damage and maximizing product life.
Reduce Downtime:- Internal components like the cable and energy absorber can be replaced on site—reducing repair times.