UK
US
Class 0 Insulating Latex Gloves (1000V)
SKU
ELE11
£31.44
Manufactured to EN60 903:2003 and CEI 60 903: 2002
PPE Category III = Irreversible risks
Electrical Safety Gloves 360mmL x 1.0mm thick Class 0
SHOULD BE USED WITH A LEATHER OVERGLOVE FOR MECHANICAL PROTECTION
Due to the gloves natural latex base our insulating gloves offer you high dielectric characteristics. The Insulation of hands is determined by the class number and nominal supply voltage.
- Fully insulating gloves each test stamped
- Manufactured to EN60903
- Pneumatic glove tester available to carry out your own air inflation test as recommended by the EN60903 and IEC903 standards (for class 00 & class 0)
- Electrical re-testing service available for Class 1 and above gloves
- Mechanical resistance obtained with a leather over glove
- High dielectric characteristics
- Ergonomic shape
- Lightly powdered
- Easy to slip on and off
- Natural latex base
- Length 360 mm
- Category AZC
- Various sizes available
- Cut Edges
How long do the Latex insulating gloves Last?
As the purpose of these gloves is to provide a high level of protection against potentially high voltages, it is important to check the integrity of the gloves as much as possible. The following is recommended:
- Class 00 and Class 0: These gloves are suitable for use as long as they have not been physically damaged. If they have been damaged (for example cuts and nicks) we would recommend immediate replacement. A simple air test (using a pneumatic glove tester or simply blowing in air and twisting the sleeve to check for leaks)
- Class 1 and Higher: These gloves must be visually inspected and tested, with a dielectric test, for suitability every 6 months from the date of manufacture onwards. The manufacturing date can be found on the product packaging.
Write Your Own Review
Click here to download our datasheet
Related Products
Check items to add to the cart or
